| |
|
|
Plaster C-Clip Bracket C-Clips Plaster Bracket Galvanised metal bracket for fitting standard australian flush switch plates into plaster board. Wall clips are factory set to suit 12mm thick plaster board but can be adjusted to suit 6mm thick fibro. Dimensions and hole centres to suit our keystone wall plates, GPO's / Power Points and most other standard Australian Switch Plates.
More Info
Manufacturer: 4Cabling Seller: 4Cabling Pty Limited
Store Rating: 
|
(Stock: In stock)
|
|
| |
|
|
Catenary Screw Wire Eye Bolt 125mm x 8mm
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
1 Way Keystone Face Plate Flush type plates to accept our standard Cat-5E or Cat-6 Keystone jacks, couplers and F-connectors. Fits all standard mounting blocks. Dimensions 70(W) x 114(H) x 6(D)mm. Supplied unloaded without Keystone jacks.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
4 Way Keystone Face Plate Flush type plates to accept our standard Cat-5E or Cat-6 Keystone jacks, couplers and F-connectors. Fits all standard mounting blocks. Dimensions 70(W) x 114(H) x 6(D)mm. Supplied unloaded without Keystone jacks.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
This is the 3V Lithium CR2032 CR 2032 Cell Button Coin Battery.This Button Coin Battery provides extensive long power life and work effectively in both low and high temperature. It can provide power for your calculator, electronic watch, notepad, computer motherboard, advanced camera, IC, etc. With this Button Cell Battery, you do not need to worry a lot during your long trip. Provides excellent continuous power sources to your device. You will get 5 batteries in one sheet. Good in low and high temperature operations. Main chemical composition is lithium and manganese. It can be used for calculator, electronic watch, notepad, computer motherboard, advanced camera, IC, etc.Time to enjoy the benefits this Lithium Button Battery brings!
More Info
Manufacturer: Seller: DinoDirect
Store Rating: 
|
(Stock: In stock)
|
|
| |
|
|
This pack contains 10 pieces cell battery which can be used as watch battery. High quality button battery for some small toys, calculators, watches, games and other electronic appliances.
More Info
Manufacturer: Seller: DinoDirect
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
Shallow Mounting Block 15mm Surface Mounting Block 15mm 15mm deep block for surface mounting standard Australian flush switch plates. Suits our Keystone Face Plates plates, GPO's / Power Points and most other standard Australian switch plates. Supplied with screws for fitting flush plate. Dimensions 118(W) x 75(H) x 15(D)mm.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
Blank Flush Plate WHITE A separate back plate and cover, allowing cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware and screw centers, making it perfect for easy flush installation on gyprock or fibro cavity walls. Dimensions 116(W) x 75(H) x 13(D)mm.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
Australian Flush Wall Plates Australian style face plates are designed to accept Australian Style Mechs & Jacks as well as 4Cabling Australian style Cat-5E or Cat-6 IDC jacks. The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers, . Supplied unloaded without jacks. Dimensions 116(W) x 75(H) x 13(D)mm. These Wall Plates are compatible with other standard Australian Jacks and Inserts.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
Australian Flush Wall Plates Blanking Plate The 2 piece design has a separate back plate and cover, allowing the cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware such as mounting bloacks and screw centers. Dimensions 116(W) x 75(H) x 13(D)mm.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
Minature Circuit Breaker - 6KA 1Pole 10Amp This 6kA MCB has been developed to provide high quality, realiable circuit protection with exceptional cost benefits. Mainly suitable for overload and short circuit protection. It can also be used for an unfrequented switch over of the circuit and illumination under normal conditions. We use quality German Tri-metal components making our MCB's extremely reliable. It is designed for AC circuits 50/60 Hz, with a rated voltage of 240V for one pole and 415 Volts on the two and three pole models.  Standard DIN rail mounting, will fit standard electrical consumer units. Accepts pin / finger type busbar.  Approvals: Australian Standard: AS/NZS 60898.1:2004 Australian Approval C-Tick Approval International Standard IEC 60898 Circuit Breakers for overcurrent protection for household and similar installation Normal usage and mounting conditions  Technical Information: Ambient temperature the breaker can work under ambient temperature -5t - +40t Altitude: the breaker can work under altitude but not exceeding 2000m Class of pollution is class 2 Mounting type is mounting type III The breaker can be mounted in rail, horizontally or vertically environmental factors are considered in the design of this circuit breaker, with many recoverable and degradable materials 10 year warranty
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
18042 ROUND HEAD SCREW M3*16 6P FOR ELECT ROCK CRAWLER
More Info
Manufacturer: Seller: RC HOBBY ESTORE
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
62051 BALL HEAD SELF TAPPING SCREW (2.6*12) 4P 1/10 CAR
More Info
Manufacturer: Seller: RC HOBBY ESTORE
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
Standard Mounting Block 35mm 35mm deep block for surface mounting standard Australian flush switch plates. Suits our Keystone Wall Plates, Our GPO's and Power Points and most other standard Australian switch plates. Breakouts on all sides allow for cable or conduit entry Supplied with screws for fitting flush plate. Dimensions 123(W) x 80(H) x 35(D)mm.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
3 Pin 10A Back Wired Single Socket Outlet Surface mount 240V 10A back wired single socket outlet, Â includes a loop terminal and clip on base. This product comes with a 10 year warranty.
More Info
Manufacturer: 4CablingSeller: 4Cabling Pty Limited
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
98073 CAP HEAD SCREW 4MM X 14MM 4 PIECES
More Info
Manufacturer: Seller: RC HOBBY ESTORE
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
The worst thing that could happen before a night dive just did! Your Laser Stick dive light batteries are dead. Never leave for your holiday without some spare batteries. Don't for your Dive Computer need's some too! This 357A button cell battery can be used in small electronic devices like cameras and calculators and watches. Button Cell Battery are a necessity in small electronics such as television remote controls, toys or flash lights and they produce about 1.5 volts per cell. Alkaline Button Cell Battery provides extensive long power life and work effectively in both low and high temperature. They are safe for the environment.High energy density, long life button battery. For use with toys, calculators, cameras, watches, games and other electronic appliances.
More Info
Manufacturer: Seller: DinoDirect
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
This LR54 button cell battery is specially designed for calculator, car and home remote controls, alarms and other small electrical appliances.
More Info
Manufacturer: Seller: DinoDirect
Store Rating:
|
(Stock: In stock)
|
|
| |
|
|
Convenient cabinet door lock band, household accessory, with adhesive tap, easy to install and its beautiful blue color which make your life easier and more colorful than before.
More Info
Manufacturer: Seller: DinoDirect
Store Rating:
|
(Stock: In stock)
|
|
|
|
List 
